 Magic
Switch Pro Release!
Magic Swithc Pro provides the same function as Magic Switch did.
The main difference is that the Tool C of Magic Switch Pro is much
smaller than the old version. This means that you can close the
console cover when using Swap Magic disc!!
Recently, there is a brand new product
called "Magic Switch" available in the market. (News from
Linker4u.com). By the Magic
Switch, we can use Swap Magic 3.3 on the latest PS2 console SCPH-7000X.
Here is the installation guide of the Magic Switch. If you need
a Chinese installation guide, click
here.
Magic
Swithc Installation Demo Video (.zip format) |
 |
 |
| 1)
Here you can see the 3 parts to the slim tools. They are lettered
A, B and C on the picture above. |
2)
Stickers are prepared behind Tool A. |
 |
 |
| 3)
A larger image to show the detail of Tool C. Please do not press the
protrusive spare part of the tool. |
4)
On the picture above you can see the console front view opened. Here
you can see where each tool takes its place. |
 |
 |
| 5)
Take the Tool A and stick it in the place on the picture above. |
6)
Now its time to set the Tool B. Please move the disk break to the
right and hold it. |
 |
 |
| 7)
Then, please insert the Tool B in the place on the picture above. |
8)
On the left hand side you can see the position for Tool C. Please
put Tool C in the gap. And then push it till it goes no further downwards.
As a result your console is ready for playing your imports. |
| Tips of installing Tool C |
|
|
|
| Here is the tips of installing
the Tool C(the biggest parts of Magic Switch). Firstly, put the Tool
C in the gap. But, before you totally push it into the gap, please
push it to the left first like the picture shown above(you can click
the pic to enlarge)and then push it in till it goes no further downwards.
If succeed, the laser lens will move downwards provided that your
PSTwo is power on. If not succeed, the laser lens will not move and
you need to redo all the steps again. |
